SFF 8087 To 4 SATA Serial Attached SCSI Cable , 1.5m Internal 6gb SAS Fan Out Cable

Internal SAS SFF-8087 to 4x SATA Cable, 1.5-meter(1.6ft)

AWG30 Twinaxial 8-pair high-bandwidth low-skew wire

Impedance = 100 Ohms

Up to 6Gbps data rates per channel

This Mini SAS to SATA cable provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector, allowing you to connect four SATA drives to an SAS controller. This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA end.

Features:

100% BRAND NEW.
100% open &short testing.

High -End internal 32-pin SFF-8484 Female Mini-SAS and Internal 36-pin SFF-8087 male Mini-SAS.
Hi-pot:DC 300V 10ms.

Insulation Resistance: 10m OHM Min.       

Contact Resistance: 2.0 OHM Max.

Gold plated PCB contacts.
Dual ports allowing redundant paths.

Ability to connect a device to multiple computers.
Full SCSI command set.

Faster interface compared to SATA, up to 30%, no STP (Serial ATA Tunneling Protocol) overhead.
No need for SATA interposer cards (for high availability of SATA drives SATA interposer cards are needed).

Connector A: SFF-8644 (4x HD Mini SAS)
Connector B: SFF-8644 (4x HD Mini SAS)
Data Rate: 12Gbps per channel
AWG30 Twinaxial 8-pair high-bandwidth low-skew wire
Impedance = 100 Ohms
Fully compliant to the latest SAS 2.1 AND SAS 3.0 interface specifications
Excellent EMI performance